Whirlpool 7LSC 9245 Guía De Uso Y Cuidado página 7

5. Select a load size setting that corre-
sponds with the size of your wash load
and the type of fabric being washed.
SW page 16
for
loading
suggestions.
Your washer has either a
slide or rotary
knob Load Size Selector.
9 For the slide Load Size Selector,
choose a setting anywhere on or
between the Ex Small and Ex Large
settings.
To change the load size setting after
the washer has started to fill, first slide
the Selector to RESET, then to the
desired new setting.
l
For a rotaw
knob
Load Size Selector,
turn the Selector to any setting on or
between Extra Small and Extra Large.
To change the load size setting after
the washer has started to fill, turn the
Selector to the desired new setting.
6. Select a wash-rinse temperature with
the Water Temperature Selector. Match
the water temperature with the type of
fabric and soils being washed. See
page 17 for water temperature guidelines.
l
Your washer has either a pushbutton or
CLEAN TOUCHTY
Water Temperature
Selector.
l
Four wash-rinse temperatures are avail-
able: hot-warm, hot-cold, warm-cold, and
cold-cold.
l
The top temperature is the wash water,
and the bottom temperature is the
rinse water.
7