baltur BT 320 Guía Rápida página 74

Display SeTTINGS menu
• Use the cursor keys
confirm this with enter
The display shows the "menu survey".
Fig. 5-23 menu survey
1 password pictogram (selected)
2 Delete curves
3 Display program settings
4 Firing-rate controller settings
5 read out actuating outputs configuration
6 password settings
7 curve settings
8Display settings
5.6.1eNTer paSSWOrD
Display menu "password settings"
• Use the cursor keys
confirm this with enter
The display shows the "password setting" menu.
Fig. 5-24 enter password menu
1 password pictogram (selected)
2 enter password
3 access level 2 displayed with access au-thorisation
• Use the cursor keys
you wish to change.
• change the number with the cursor keys
• confirm the password with enter
5.6.2 p rOGraM SeqUeNce
to select the menu and
.
to select the menu and
.
to select the password field
.
.
22 / 50
0006081511_201311
configure program sequence
• Use the cursor keys
confirm this with enter
The display shows the program sequence overview.
Fig. 5-25 Overview program sequence
1 Duration of pre-ventilation [selected]
2 pilot burner oil operation
3 Duration of post-ventilation
4 valve leakage test
5 pilot burner gas operation
Set duration of pre-ventilation
• Use the cursor keys
confirm this with enter
The display shows the "duration of pre-ventilation" menu.
1 2
Fig. 5-26 Duration of pre-ventilation menu
1 Duration of pre-ventilation pictogram
2 pre-ventilation time set
3 accept value by pressing eNTer
• Use the cursor keys
wish to change.
• change the value of the number with the cursor keys
.
• confirm the entry with enter
The countdown starts.
to select the menu and
.
to select the menu and
.
3
to select the number you
.