baltur BT 320 Guía Rápida página 79

• Use the cursor keys
ating drive.
• Select enter
The positions for all actuating drives of the selected firing-rate point
are saved.
You have the option to select another firing-rate point.
i
Set the other load levels using the same procedure!
Delete firing-rate curves
• In the "Settings" menu path, use the cursor keys
to select the menu
.
The display shows the "delete curves" menu.
Fig. 5-41 Delete curves menu
1 Delete curves pictogram
2 Delete curves selected
3 confirm deletion of curves
The display shows the "confirmation prompt".
Fig. 5-42 Confirmation prompt of the delete curves menu
1 Back to previous menu
2 Delete values [selected]
3 proceed with deletion of values
Select Enter .
The curve values are deleted.
The display shows the "values deleted" menu.
to switch to a different actu-
and confirm by pressing enter
0006081511_201311
Fig. 5-43 Values deleted menu
1 Values deleted
UI300 display settings
Fig. 5-44 Display settings menu
1 UI300 pictogram
2 Brightness
3 contrast
4 Waiting time for screen saver
i
A "0" value cannot be entered for the screen saver!
5.6.3 OTHer DISpLaYS
No connection between UI300 and BT300
Fig. 5-45 No connection
1 UI300 user interface pictogram
2 Symbol for no connection
3 BT300 burner control
Display shown e.g. when using the LSB remote software and
the communication between BT300 and UI300 is temporarily not
available.
Termination
Fig. 5-46 Termination
1 Communication error pictogram - no connection available
27 / 50