Changing Battery - TRUE METRIX GO Guía De Prueba Rápida

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Caution!
Other disinfectants have not been tested. The effect of other disinfectants used interchangeably has not been
tested with the lancing device. Use of disinfectants other than Super Sani-Cloth Wipes may damage lancing
device.
Do not use lancing device and call Customer Care for assistance at 1-800-803-6025, Monday - Friday, 8AM-8PM
EST, if:
~ Markings on lancing device are coming off or missing,
~ Trigger Button is hard to push or does not work,
~ Arming Barrel does not click when gently pulled back.
Only use Super Sani-Cloth Wipes to clean and disinfect the lancing device. Super Sani-Cloth Wipes may be
purchased at the following places: • Amazon.com • Staples.com • Walmart.com
Super Sani-Cloth Wipes have been tested on the lancing device for a total of 1095 cleaning and disinfecting
cycles, which is equal to cleaning and disinfecting the lancing device once a day for a 3 year period. Lancing
device may be cleaned and disinfected up to 7 cycles per week for 3 years.
54

Changing Battery

1. Remove meter from top of
2. Turn meter over until the
test strip vial by holding the
meter label is facing up.
vial and twisting the meter
Pull Battery Tray out until
¼ turn counterclockwise.
battery is exposed.
Lift meter from vial top.
3. Holding the Battery Tray
over your hand, press
on edge of battery until
battery drops out.
4. Insert new battery into Battery
Tray with "+" side facing up. Slide
Battery Tray back into meter.
55

Publicidad

Capítulos

Tabla de contenido
loading

Productos relacionados para TRUE METRIX GO

Tabla de contenido