Matrox m3D Guia De Instalacion página 9

computer doesn't have this option, you may be able to manually assign an IRQ to
your m3D card using the CMOS setup utility.
For more information on your computer's CMOS setup utility, see your system
manual or contact your system manufacturer.
Solution – If there's a conflict with an ISA card in your computer, you may have to
change that card's IRQ setting. IRQ settings on most ISA cards are changed with
jumpers or switches on the cards. For more information, see the documentation
that came with your ISA card.
Cause – Your computer's other BIOS settings may be incorrect.
Solution – Reset your computer's BIOS settings to the factory defaults using the
CMOS setup utility. The factory defaults are usually the "safest" settings. Check
your system manual for more information.
(ENGLISH) 9