With Or Without Built-In Harness - Graco NAUTILUS Manual De Instrucciones

8.5 With OR Without Built-in Harness

• Combination Lap/Shoulder Belt with
Locking Latch Plate
Once it is buckled, this type of belt has a
latchplate that will not allow the lap portion
of the belt to loosen. Belt is tightened by
pulling hard on the shoulder portion of the
vehicle belt while pushing down hard on
the child restraint.
• Combination Lap/Shoulder Belt with
Sliding Latch PlateThis belt has a
latchplate that slides freely along the belt.
• This belt MUST be converted to prevent
movement of the lap portion of the belt. You
must use the locking clip provided with the
child restraint, unless your vehicle's seat
belt can be converted in another way as
described in your vehicle owner's manual.
When using booster seat WITHOUT the
built-in harness, locking clip is NOT
to be used.
If your model does not have a locking clip, call
us at 1-800-345-4109 to order a locking clip.
22
Locking clip