Detach & Assemble Soft Goods - Nuna Triv Manual Del Usuario

Fold the Stroller with Post Adapters
Before folding the stroller with post adapters, adjust the
handle to the lowest position and make sure the front swivel
locks are unlocked.
1
- Pull the folding webbing of the post adapters to fold the
stroller. (45)
The stroller with the post adapters can stand by handle
and the rear wheels.
Car Seat Ring Adapter
For PIPA series infant carrier assembly and usage, please
refer to the PIPA series infant carrier instruction manual.
1
- To attach the car seat ring adapter, place the car seat
ring adapter on the seat mount. (46) A "click" sound
means the car seat ring adapter is locked.
2
- To attach the infant carrier, place the infant carrier on the
car seat ring adapter. A "click" sound means the infant
carrier is attached. (47)
3
- The infant carrier and the car seat ring adapter can be
attached rear or forward facing. (48)
4
- To remove the infant carrier, release the second safety
lock for adapter (49)-1, then push the release button
located on the back of the infant carrier (49)-2 and lift up
(49)-3.
5
- To remove the car seat ring adapter, push the adapter
release buttons (50)-1 and lift up (50)-2.
Remove the infant carrier before folding.
17 TRIV instructions
Fold the stroller with Car Seat ring adapter
Before folding the stroller with car seat ring adapter, adjust
the handle to the lowest position and make sure the front
swivel locks are unlocked.
1
- Pull the folding webbing of the car seat ring adapter to
fold the stroller. (51)
The stroller with the car seat ring adapter can stand by
handle and the rear wheels.
TRIV Rain Cover
Check that the canopy is completely open before attaching
the rain cover.
1
- To assemble the rain cover, place it over the pushchair.
(52)
ALWAYS check ventilation when the rain cover is on the
product.
ALWAYS check that the rain cover has been cleaned and
dried before folding.
DO NOT fold the pushchair when the rain cover is
attached.
DO NOT place your child in the pushchair in hot weather
with the rain cover attached.
Detach & Assemble Soft Goods
To detach seat soft goods, follow the steps (53) - (66) as
shown, and to re-assemble seat soft goods, follow the steps
above in reverse.
TRIV instructions 18