Accessory; Rain Cover; 44 Detach & Assemble Soft Goods; Cleaning And Maintenance - Nuna Pepp Next Manual Del Usuario

1
- To remove the seat pad, unsnap the seat pad from the
back of the seat. (28)
2
- Then, unbuckle the harness, thread the harness through
the harness slots and remove the seat pad. (29)
3
- Snap the canopy and the back of the seat after removing
the seat pad as (5).
DO NOT remove the backrest tube.

Accessory

Rain Cover

To assemble the rain cover, place it over the stroller seat.
(30)
ALWAYS check ventilation, especially in hot weather
when the rain cover is on the product.
ALWAYS check that the rain cover has been cleaned and
dried before folding.
DO NOT fold the stroller after assembling the rain cover.
DO NOT place your child into the stroller assembled
with rain cover during hot weather.
Detach & Assemble Soft Goods
To detach the soft goods, follow steps (31)-(45); to
assemble, follow the steps above in reverse.
The armbar cover is not removable on certain models.
15 PEPP next instructions

Cleaning and Maintenance

Clean the frame, plastic parts, and fabric with a damp
cloth, but do not use abrasives or bleach. Do not use silicon
lubricants as they will attract dirt and grime. Do not store
your stroller in a damp place.
Clean the stroller wheels regularly with water and remove
any dirt.
To ensure long-lasting use, wipe off this product with a soft,
absorbent cloth after using it in rainy weather.
Refer to the care label attached to the fabric for washing and
drying instructions.
It is normal for fabric to color from sunlight and to show
wear and tear after a long period of use, even when used
normally.
For reasons of safety, only use original Nuna parts.
Check regularly if everything functions properly. If any parts
are torn, broken, or missing, stop using this product.
NUNA International B.V. Nuna and all associated logos are trademarks.
PEPP next instructions 16