Operating Test; Initial Use - Novoferm SpeedRoller Manual De Instalación

1.3 Tolerances
All parts are produced to standard tolerances
with the utmost care. The standard tolerance for
steel parts is ± 2 mm, and for aluminium ± 1 mm.
The maximum tolerance for assemblies is the
sum of the tolerances for the various materials.

Operating Test

1.4
• After completing the installation, operation
of the door must be checked using the
Delivery checklist in the User manual.
• Fill out the Delivery checklist truthfully and
sign it.
• Pass this Installation manual together with
the User manual and other documentation
to the customer.
1.5

Initial use

Warning
A defective door can hurt people or damage
property. Only use the door when it is in a
faultless condition.
+++ WARNING +++ WARNING +++ WARNING +++
• An electrically powered door may only be
put into use subsequent to the issuing of a
declaration of conformity.
• A SpeedRoller door may only be used at
ambient temperatures between -30 and +40
degrees Celcius.
• Properly instruct users how to operate the
door. Do not permit third parties (visitors for
example) to use the door.
• These installation instructions are to be
handed over to the customer and must be
kept during the whole period of use!
• Do not modify the software of the
programmable control system.
• Modification or extension of the product
only by the supplier.
• Novoferm is not liable for damage and / or
injury caused as a result of actions which
are contrary to this manual.
This installation manual must be handed to the customer and must be kept in a safe place throughout the whole period of use!
Warning
Movements of the door can hurt people or
damage objects.
• Ensure that during the operation of the
door no persons or objects are in the
range of the door leaf.
• Never grab in the guide, the tension
spring, the tension belt or pulley during
operation of the door.
• Never place objects against the door
or against the roller.
• Never attach parts to the door which
increase its weight.
• Never use the door as a hoist to lift
people or objects.
+++ WARNING +++ WARNING +++ WARNING +++
1.6
Disassembly
The door should be disassembled by a qualified
expert following chapter 4 to 7 in reverse order.
Warning
When disassembling the protective hood or
the door, parts could fall down, causing
people to get injured or objects getting
damaged. For instance, support the top roll
with a forklift before disassembling it.
+++ WARNING +++ WARNING +++ WARNING +++
EN
3