Assembly - Husky H15123TK Manual Del Operador

KNOW YOUR AIR COMPRESSOR
See Figure 2.
Before attempting to use this product, familiarize yourself
with all operating features and safety rules.
TOOL AND ACCESSORY KIT
The accessory kit includes: 1 female quick coupler, 1
male connector, an inflating gun, a blow gun with siphon
spray attachment, 2 inflation nozzles, 2 inflation needles,
a thread sealing tape, a 25' black coil hose, a 2in1 brad/
stapler, a set of nails and staples, lubricating oil and 2
Allen wrenches.
OIL-FREE UNIVERSAL MOTOR
Your air compressor features permanently lubricated
bearings.
UNPACKING
Carefully remove the compressor from the box. Make
sure that all items listed in the packing list are included.
Inspect the compressor carefully to make sure no
breakage or damage occurred during shipping.
Do not discard the packing material until you have
carefully inspected and satisfactorily operated the tool.
If any parts are damaged or missing, please call
1-866-242-4298 for assistance.
WARNING:
If any parts are missing do not operate the compressor
or air tools until the missing parts are replaced. Failure
to do so could result in possible serious personal injury.
WARNING:
Do not attempt to modify this tool or create accessories
not recommended for use with this tool. Any such
alteration or modification is misuse and could result
in a hazardous condition leading to possible serious
personal injury.
FEATURES
PRESSURE REGULATOR KNOB
Use the pressure regulator knob to adjust the amount of
air being delivered through the hose.
REGULATOR PRESSURE GAUGE
The current line pressure is displayed on the regulator
pressure gauge. This pressure can be adjusted by rotating
the pressure regulator knob.
SAFETY VALVE
The safety valve is designed to automatically release air if
the air receiver pressure exceeds the preset maximum.
TANK PRESSURE GAUGE
The tank pressure gauge indicates the pressure of the air
in the tank.

ASSEMBLY

PACKING LIST
Air Compressor
Coil Hose
1/4 in. NPT Quick Coupler
1/4 in. NPT Connector Fitting (already installed on coil hose)
Inflating Gun
Siphon/Blow Gun
2in1 Brad/Stapler
Set of Nails and Staples, Lubricating Oil, Allen Wrenches (2)
Inflation Nozzle (2)
Inflation Needle (2)
Thread Sealing Tape
Operator's Manual
Replacement Parts List
11
(already installed on coil hose)