Assembly - Husky 2G110DP-R Manual Del Usuario

KNOW YOUR AIR COMPRESSOR
See Figure 2.
Before attempting to use this product, familiarize yourself
with all operating features and safety rules.
TOOL AND ACCESSORY KIT
OIL-FREE UNIVERSAL MOTOR
Your air compressor features permanently lubricated
bearings.
UNPACKING
This product has been shipped completely assembled.
Carefully remove the tools and any accessories from
the box. Make sure that all items listed in the packing
list are included.
Inspect the compressor and tools carefully to make
sure no breakage or damage occurred during shipping.
Do not discard the packing material until you have
carefully inspected and satisfactorily operated the tool.
If any parts are damaged or missing, please call 1-866-
242-4298 for assistance.
WARNING:
If any parts are missing do not operate the compressor
or air tools until the missing parts are replaced. Failure
to do so could result in possible serious personal injury.
FEATURES
PRESSURE REGULATOR KNOB
Use the pressure regulator knob to adjust the amount of
air being delivered through the hose.
REGULATOR PRESSURE GAUGE
The current line pressure is displayed on the regulator
pressure gauge. This pressure can be adjusted by rotating
the pressure regulator knob.
SAFETY VALVE
The safety valve is designed to automatically release air if
the air receiver pressure exceeds the preset maximum.
TANK PRESSURE GAUGE
The tank pressure gauge indicates the pressure of the air
in the tank.

ASSEMBLY

PACKING LIST
Air Compressor
Coil Hose
Inflation Hose
1/4 in. NPT Quick Coupler
1/4 in. NPT Connector Fitting (already installed on brad nailer)
Brad Nailer
Set of Nails, Lubricating Oil, Allen Wrenches (2)
Tire Gauge
Inflation Nozzle (2)
Inflation Needle (2)
Operator's Manual
Replacement Parts List
11
(already installed on compressor)
(already installed on compressor)
(already installed on coil hose)