Installing The Double Microphone; Installing The Screen; Using The Parrot Mki9200 For The 1St Time; Navigating Through The Menus - Parrot MKi9200 Guía De Instalación Rápida

Once you have stuck the support on the
dashboard, wait for approximately 2 hours to make
sure the adhesive tape adheres well.

Installing the double microphone

Parrots microphones are directional and need to be pointed
towards the user to pick up clear speech. The microphone
should be installed near the front roof light cluster, in the
centre of the vehicle with a clear path to the user.

Installing the screen

Remember to remove your screen when leaving the vehicle
to avoid tempting any would-be thieves and to prevent
prolonged exposure to sunlight.

Using the PARROT MKi9200 for the 1st time

Navigating through the menus

• Press the central jog wheel to access the menus.
> The kit says and displays the name of the current menu.
• Browse through the menus by turning the wheel and
confirm with the green button or by pressing the scroll
wheel.
• To exit the menu, press the red button or wait for a
few seconds.
14
Pairing and connecting a mobile phone
to the Parrot MKi9200
Prior to using your Parrot MKi9200 with your phone for the
very first time, you must initially pair both devices.
1. Make sure the Parrot MKi9200 is set so that it is visible by
all Bluetooth ® devices. To do so, press the jog wheel and
select Settings > Bluetooth > Visibility > Visible.
The Parrot MKi9200 is visible by default.
2. Press the jog wheel and select
> If your mobile phone's model appears in the list, select it
and confirm.
> If your mobile phone model doesn't appear in the list,
select the Other phones option.
3. From your phone, search for Bluetooth peripherals. Refer
to your phone user guide for more information.
> The list of the available Bluetooth peripherals
is displayed.
4. Select «Parrot MKi9200» in the list.
> You are prompted to enter a PIN code.
5. Enter «0 0 0 0» on your phone.
> «Pairing successful» is displayed on the screen of the
Parrot MKi9200.
Settings > Pair with...