Stanley CL90i Manual De Instrucciones página 9

Laser Unit
Locked
Laser ON / OFF
Pulse Mode
77-021
1.
Unlocked
2.
3.
Laser Mode LEDs
4.
5.
6.
Pulse Mode LED
7.
Transport lock in locked position.
Self-leveling function is disabled.
Transport lock in unlocked position.
Self-leveling function is enabled.
Press power key to power laser ON. Press
and hold for 3 seconds to power laser OFF.
Press power key to toggle through available
laser modes - horizontal only, vertical only,
both horizontal and vertical, horizontal and
vertical with 90° vertical reference beam, all
on with self-leveling disabled.
Laser mode LEDs light red and / or green
to indicate current laser mode. LED code is
shown on keyboard.
Power key is functional in both the locked
and unlocked switch position.
Press pulse mode key to toggle between
pulse mode ON and OFF. Indicator LED lights
green when on. Pulse mode allows use with
a laser detector.
Laser beam(s) blink to indicate the laser unit
is out of the working range for laser modes
1 - 4 when self-leveling function is enabled.
Reposition laser unit to be more level.
9