Model Descriptions; All Models; Model Tf-1919; Model Tf-4619 - Hatco THERMO-FINISHER TF-1900 Serie Manual De Instalación Y Funcionamiento

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 23
IMPORTANT SAFETY INSTRUCTIONS
WARNINGS
To avoid any injury, turn the power switch off, unplug
the unit from the power source and allow to cool before
performing any maintenance.
Unit is not waterproof. DO NOT submerge in water. Do
not operate if it has been submerged in water. Do not steam
clean the interior or flood with water or liquid solution.
To avoid electrical shock or personal injury, do not steam
clean or use excessive water on the unit.
If service is required on this unit, contact your Authorized
Hatco Service Agent, or contact the Hatco Service
Department at 800-558-0607 or 414-671-6350;
fax 800-690-2966 or International fax 414-671-3976.
This product has no "user" serviceable parts. To avoid
damage to the unit or injury to personnel, use only
Authorized Hatco Service Agents and Genuine Hatco
Replacement Parts when service is required.
Genuine Hatco Replacement Parts are specified to operate
safely in the environments in which they are used. Some
aftermarket or generic replacement parts do not have
the characteristics that will allow them to operate safely in
Hatco equipment. It is essential to use Hatco Replacement
Parts when repairing Hatco equipment. Failure to use Hatco
Replacement Parts may subject operators of the equipment
to hazardous electrical voltage, resulting in electrical
shock or burn.

MODEL DESCRIPTIONS

ALL MODELS

The Thermo-Finisher Food Finisher models have an easy-to-clean
interior, constructed of stainless steel and heavy duty glass.
The units feature quick-heating infrared ribbon elements with
a microprocessor to control the temperature and heating time.
All models come with a user friendly control panel which accepts
up to five preprogrammed recipe times. A plate rack and attached
cord and plug set are included.

MODEL TF-1919

The TF-1919 model features one upper element to heat the food
product on the plate and one lower element to heat the center
of the plate. Loading and unloading of food is done on the control
side of the unit.
Form No. TF1946CEM-0802
Do not remove the glass from the unit for cleaning purposes.
Doing so may cause injury or damage to the unit.
Locate the unit at the proper counter height, in an area that
is convenient for use. The location should be level to prevent
the unit or its contents from accidentally falling, and strong
enough to support the weight of the unit.
Do not place anything on top of the unit; doing so could
damage the unit or subject personnel to possible injury.
Do not place any objects on the metal rack during preheat.
Doing so will most likely over-cook the product.
Abrasive cleaners could scratch the finish of your
Thermo-Finisher, marring its appearance and making
it susceptible to dirt accumulation.

MODEL TF-4619

The TF-4619 model features four upper elements that heat food
product on the plate and one lower element that heats the center
of the plate. Loading and unloading of food is done on the control
side of the unit.
5
CAUTIONS
CAUTIONS

Publicidad

Tabla de contenido
loading

Tabla de contenido