cleaner
Figure 14. Optimal Entry Point in Pool
IMPORTANT
Cleaner power cable may become tangled if correct
procedure is not followed after each cleaning cycle.
If tangling occurs, follow these steps:
1.
Gently pull the fl oating cable to bring the cleaner within arm's reach. When
the cleaner is within arm's reach, use the handle to remove from the water
(Figure 15). Never lift the cleaner out of the pool by the fl oating cable.
Figure 15. Lift Cleaner From Pool with Handle
Recommended
cleaner
Recommended
entry point
WARNING: Do not use
an extension cord
Not
Control Unit
Page 15