Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

3.
To install a new track, place the inside rib of the track into the groove in the
fi rst wheel. (See Figure 24.)
4.
Stretch the track around the second wheel (see Figure 24). Push and
position the rib of the track so that the track is seated properly in the groove
of the wheel.
5.
Verify the rib of the track is positioned properly within the groove of each of
the wheels. If necessary, turn the wheels gently to seat track.
Figure 24. Stretch Track Around Wheels

Spare Parts

The complete spare parts list and exploded view is available on the Polaris website.
www.polarispool.com
USA:
www.polarispool.ca
Canada:
Contact your local maintenance provider to perform diagnostic tests or repairs not
shown in general maintenance.
.
Page 19

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

P724

Tabla de contenido