Page 12
Clean the Filter Canister
Empty the canister as soon as the cycle ends.
To avoid electric shock and other hazards which could result in
permanent injury or death, disconnect (unplug) the cleaner from the
power source before performing any cleaning and maintenance.
1.
Unplug power to the cleaner at the control unit. Unplug the control unit
from the power source.
2.
Pull up to release the fi lter canister handle (Figure 9).
Figure 9.
Release Filter Canister Handle
3.
Grasp the handle and lift up to remove the fi lter canister (Figure 10).
Figure 10. Remove the Filter Canister
WARNING