Replacing Battery Pack (Gn Accessory); Adding Extra Battery Charging Facility; Replacing Battery Pack; Audio And Visual Indicators - Jabra GN9300e Manual De Usuario

To pair your headset to your DECT cordless telephone:
1. Press and hold down the headset's talk button and mute button (at tip of volume control)
for 5 seconds.
–> The headset's link indicator will flash rapidly.
2. Activate the cordless telephone's GAP mode. Consult your cordless telephone's manual
GAP compatibility/pairing instructions.
–> The headset's link indicator will light for 2 seconds to indicate successful pairing.
Your headset is now ready to use with your cordless telephone. Consult your cordless
telephone's user manual for using your headset with your cordless telephone.
6. Replacing the battery pack (GN accessory)
GN9350e GN9330e GN9330e USB

6.1 Adding extra battery charging facility

An extra battery charging facility is available as an accessory. This can be attached to your base
to allow you to charge an extra battery.
To add the extra battery charging facility cover:
1. Remove the blind cover from the base by sliding it upward until
removed.
2. Slide the extra battery charger into the base charge tower until it
clicks in place.
The extra battery can be charged in its receptor on the back of the
charge tower. An indicator above the receptor will light when the battery is placed correctly
and is charging. The indicator will turn off when battery is fully charged.
Important: During everyday use, the base's leftmost indicator will flash when there is less than
30 minutes of talk time left.
16
GN9350e GN9330e GN9330e USB
6.2 Replacing the battery pack
The headset's battery pack can be changed when required.
To replace the battery pack on a wearing style:
1. Unclip the wearing style from the battery pack.
2. Slide the backside of the headset speaker-housing
downwards.
3. Slide the new battery pack (from the extra battery
charging facility) onto the headset.
The headset's link indicator will light for 2 seconds to confirm successful replacement of
the battery pack.
4. Replace the wearing style.
5. Recharge the empty battery by sliding it into the extra battery charging facility.

7. Audio and visual indicators

The headset and base have audio and visual indicators that represent various functions
associated with setting up and using the product.
GN9350e GN9330e GN9330e USB
7.1 Headset's audio indicator
Headset action
Low battery
Volume up/down
Volume max/min reached
Incoming call (with RHL functionality)
Incoming call (with VoIP call)
Conference call request
Conference call accept
Telephone line (open/close)
Headset out of range
Mute activation/deactivation
Mute activated
Audio indication
5 rapid beeps + 20 second pause
1 quick beep in increasing/decreasing intensity
1 rapid shrill/low beep
Rapid multi-tone + 2 second pause (repeats)
Depends on VoIP application
4-pitch tone
1 beep
1 beep
3-pitch tone
1 beep
2-pitch tone + 10 second pause (repeats)
17