Change Default Phone Type; Wearing Styles; Headband Wearing Styles; Neckband Wearing Styles - Jabra GN9300e Manual De Usuario

To select the appropriate interface:
1. Place the headset in the base with its indicators facing you.
2. Press the Telephone button on the Base for 6 seconds while the
headset is in the base until the headset's blue LED is flashing rap-
idly
3. Use the volume up/down button to shiftbetween the different EHS
settings – see table below.
The base unit's 4 battery indicators show which EHS mode
the GN9330e is in.
GN RHL
DHSG
AEI
MSH
Note: If more than 15 seconds elapses without pressing the volume + or volume – button, the last
selected interface will be activated.
4. To set the EHS mode, press the Telephone button on the Base for 6 seconds until the 4
battery indicators flashes once. Now wait 5 seconds and the headset is initialized.

2.4.7 Change default phone type

You can chose to have either PC or Telephone as the default phone type
(Telephone is factory default). To change setting, press and hold the phone
type button on the base until the blue LED below the button is solid blue.

3. Wearing styles

Your headset offers headband, neckband and ear
hook wearing styles.
Note: GN9330e and GN9330e USB come with an ear
hook and a headband. Neckband is available as an
accessory.
GN9350e GN9330e GN9330e USB

3.1 Headband wearing styles

You can choose to wear the headset on either the
left or right ear. The headset can be rotated 360˚.
Changing boom arm wearing side (headband)
1. Rotate boom arm unit 90°.
25 %
100 %
10
GN9350e GN9330e GN9330e USB
3.2 Neckband wearing style
With the neckband, the headset is worn on the right ear.
Note: This wearing style is available as an accessory for GN9330e and GN9330e USB.
GN9350e GN9330e GN9330e USB

3.3 Ear hook wearing styles

You can choose to wear the headset on either the
left or right ear. The headset can be rotated 360˚.
Changing ear hook wearing side
1. Flip the ear hook over.
2. Rotate the ear hook 180°.
GN9350e GN9330e GN9330e USB

3.4 Changing wearing styles

All wearing styles (headband, neckband and ear hook) are inter-
changeable.
To change any wearing style (for example, from headband to ear hook):
1. Unclip headset from the current wearing style.
2. Affix the new wearing style.
GN9350e GN9330e GN9330e USB

3.5 Receive volume button reorientation

By default, the headset is set-up for wearing on the right ear. This means the volume
control is pushed up to increase the volume, and pushed down to decrease the volume. If
you change the wearing ear of the headset, you may also want to change the orientation of
the volume control so that volume is still increased by pressing the volume control up.
To change the headset's volume control button orientation:
1. Make sure there is no link between the headset and the base, (indicator on headset is not
flashing).
2. Press the headset's mute button for 10 seconds.
–> The headset's link indicator will light.
3. Determine how you prefer to increase volume (pushing the control either up or down).
4. Press the volume control either up or down (according to preference) until the headset's
link indicator turns off.
11