Battery Indicator; What The Lights Mean; Using The Jabra Bt5010 With 2 Mobile Phones; Using A Jabra Bluetooth Hub - Jabra BT 5010 Manual De Instrucciones

Redial last number*
US
• Press the answer/end button.
Adjust sound and volume
F
• Press the volume up or down (+ or -) to adjust the volume. (Volume up
button as per default on top of the headset when worn on the right ear).
ES
• To mute, press both volume up and down at the same time. A low beep
alert plays during a muted call.
PT
• To un-mute, tap either of the volume buttons.
Call waiting and placing a call on hold*
This lets you put a call on hold during a conversation and answer a waiting call.
• Press the answer/end button once to put the active call on hold and
answer the waiting call.
• Press the answer/end button to switch between the two calls.
• Tap the answer/end button to end the active conversation.
* Functions marked with * are dependent on your phone supporting these
features. Check your phone's user manual for further information.
Enable/disable vibrator
• Press and hold both volume buttons in standby mode.
Volume buttons
To change the orientation of the volume buttons (default setting is for right
ear wearing mode)
• Press and hold the answer/end button in standby mode and tap the
desired up button.

7. Battery Indicator

When the Jabra BT5010 is turned on or a button is pressed more than 1 minute
after last button press, the LED indicates the battery level of the headset.
2 Green flashes = 20% – 100% Charged
2 Yellow flashes = 10% – 20% charged
2 Red flashes = Less than 10% charged

All manuals and user guides at all-guides.com

8. What the lights mean

What you see What this means about your headset
2 coloured flashes See battery indicator (see section 7)
Flashing blue Incoming call
and green light
Flashing blue light Flashing every second: active call
Flashing blue light Flashing every three seconds: in standby mode
(only for 1 minute then off)
Flashing red light Running low on battery
Solid green light Fully charged
Solid red light Charging
Solid blue light In pairing mode (see section 3)

9. Using the Jabra BT5010 with 2 mobile phones

Jabra BT5010 is capable of having two mobile phones connected to the
headset at the same time. This will give you the freedom of only having
one headset to operate both your mobile phones and also use the headset
functions as described in section 6.
Please note the Last Number Redial will dial the number from the last
outgoing call, independent of the mobile phones, and the Voice Dialling
function will only work on the last paired mobile phone.

10. Using a Jabra Bluetooth Hub

The Jabra BT5010 can be used along with the Jabra Bluetooth Hub (sold
separately). This will enable you to use the headset with both your mobile
phone and your office phone.
To pair the Jabra BT5010 with the Jabra Bluetooth Hub
The pairing process is a little different:
• Put your Jabra BT5010 in pairing mode.
• Put the Jabra Bluetooth Hub in pairing mode.
• Place them close together. You do not need a dedicated pin code to pair
the two Jabra products. Consult the Jabra Bluetooth Hub user manual
for more information on how to connect the Bluetooth hub to your
office phone.
The use of the Jabra BT5010 with the Jabra Bluetooth Hub is very similar to
using the headset with a mobile phone only. The only difference lies in the
transfer of a call to the headset from the office phone.
Jabra BT5010 Bluetooth headset
U
E
P