Digital Zoom - Samsung SCC-B5367 Manual Del Usuario

DIGITAL ZOOM

RATIO
< LOCATION >
- LOCATION : If you press the SETUP switch in the
condition where the image is enlarged as much as the
ratio setting, you can watch an invisible area of the
effective screen as well using the

Note :
If the digital zoom factor is set to larger than 1x, the FENCE
–
function will be deactivated.
The DIGITAL ZOOM function enlarges the pixel itself, which can
cause deterioration of the quality.
❖
DETAIL [0~3]
Controls the horizontal or vertical distinction.
❖
V-SYNC
Select the vertical sync mode for INT or LINE.
If you select INT, the camera will use the internal
synchronization.
If selecting LINE, the camera will use the external
power source frequency for the synchronization.
You can adjust the LL-PHASE.

Note :
Use of DC 12V will fi x V-SYNC to INT, which can not be
–
How to use OSD Menu
[X1.0]
switch.
[INT, LINE]
changed.
❖
AGC COLOR SUP
Adjust the color scheme according to the AGC
value.
❖
REVERSE
Mirrors video signals horizontally, vertically, or
both.
❖
POSI/NEGA
Output as it is or mirror the video brightness
signal.
❖
PIP
Displays a sub image together with the main
image on the same screen using the Picture In
Picture function.

Note :
If more than one privacy zone is set and the PRIVACY
–
SET is set to ON, the PIP function will be deactivated.
If the INTELLIGENCE function is set to FENCE mode, the
–
PIP menu will be deactivated.
❖
DIS
Digital Image Stabilization will set the anti-shake
compensation.

Note :
If you set DIS to ON, the compensation area will be
–
enlarged as set in the digital zoom factor.
If you set the digital zoom factor to greater than the
enlarged zoom factor for the compensation, the DIS
function will be deactivated.
[LOW , MID, HIGH]
[OFF, H, V, H/V]
[+, -]
[OFF, ON]
[OFF, ON]
English 25
–