Warranty Certificate - EMAK BT 2100E Manual De Istrucciones

C) Th e machine doesn't start; the motor is making a noise
but the blades aren't spinning.
Solution: Check whether the blade-holder disc is able
to spin freely. If this is not the case, contact your nearest
Authorised Dealer because the motor is probably damaged
and may require servicing by a specialist repair shop.
Fig. 3
USER INFORMATION (Fig.3)
In accordance with Art. 13 of Legislative Decree 25 July
2005, no. 15 "Implementing Directives 2002/95/EC,
2002/96/EC and 2003/108/EC, on the restriction of the
use of hazardous substances in electrical and electronic
equipment and on waste disposal"
If the equipment bears a symbol depicting a crossed-out
refuse bin, this means that it must be collected separately
from other waste at the end of its working life.
When the equipment is no longer serviceable, accordingly,
it should be taken by the user to a special sorted collection
centre for electrical and electro-technical waste, or if
purchasing a new product of similar type, returned to the
dealer on a one-for-one basis (takeback scheme).
Proper sorted collection ensures that the discarded
equipment can be sent subsequently for eco-friendly
recycling, treatment and disposal; this helps to avoid
any possible negative impact on the environment and on
health, besides enabling the reclamation of materials used
in manufacturing the equipment.
Unauthorised dumping of waste is irresponsible, and
punishable under regulations pursuant to Leg. Decree
no. 22/1997" (Article 50 et seq. of Legislative Decree no.
22/1997).

WARRANTY CERTIFICATE

Th is machine has been designed and manufactured using
the most modern techniques. Th e manufacturer guarantees
the machine to be free from defects for a period of twenty-
four (24) months from the date of purchase provided it is
used exclusively for private/hobby purposes. If the machine
is used for professional purposes, the warranty period shall
terminate aft er a period of six (6) months. If the machine
is used for hire, the warranty period shall terminate aft er a
period of three (3) months.
Limited warranty
1) Th e warranty period starts on the date of purchase. Th e
manufacturer, acting through the sales and technical
MODEL
SERIAL N.
BOUGHT BY MR/MS
Do not send! Only attach to requests for technical warranties.
assistance network, shall replace free of charge any
parts proven defective in material, machining or
manufacturing. Th e warranty does not aff ect the
purchaser's rights as established under legislation
governing the consequences of defects in the machine.
2) Technical personnel will undertake the necessary
repairs in the minimum time possible, compatible with
organisational needs.
3) To make any claim under the warranty, this certifi cate
of warranty, fully completed, bearing the dealer's
stamp and accompanied by the invoice or receipt
showing the date of purchase, must be displayed to
the personnel authorised to approve work.
4) Th e warranty shall be null and void if:
− the machine has evidently not been serviced
correctly,
− the machine has been used for improper purposes or
has been modifi ed in any way,
− non-original spare parts and accessories have been
fi tted,
− work has been done on the machine by unauthorised
personnel.
5) Th e warranty does not cover consumables or parts
subject to normal wear.
6) Th e warranty does not cover work to update or improve
the machine.
7) Th e warranty does not cover any preparation or
servicing work required during the warranty period.
8) Damage incurred during transport must be immediately
brought to the attention of the carrier: failure to do so
shall render the warranty null and void.
9) Th e warranty does not cover injury or damage caused
directly or indirectly to persons or things by defects
in the machine or by periods of extended disuse of the
machine resulting from the said defects.
EC DECLARATION OF CONFORMITY in accordance
with Directive 89/392/EEC
Th e undersigned
EMAK spa Via Fermi, 4 – Bagnolo in Piano (RE) – ITALY
declares under its sole responsibility that the
bioshredders SH 210 E – BT 2100 E
serial number identifi cation 10-072101÷10-072250
conforms with the provisions of the following harmonised
standards: EN 13683:2003
conform to the requirements of Directives
2000/14/EC – 73/23/EC – 89/336/EC - 98/37/CE
Guaranteed sound power level: 93 dB (A)
Bagnolo in Piano (RE)
ITALY, 01/01/2008
Giacomo Ferretti – Chairman Emak
DATE
DEALER
S.P.A.
GB
7