Warranty Certificate - EMAK BT 2400E Manual De Instrucciones

B) The machine doesn't start and doesn't make any sound.
Solution: Check that the cable is connected and that the
power is switched on at both ends. Also check the fuse if
necessary. If the fault has not been resolved, contact your
nearest Authorised Dealer.
C) The machine doesn't start; the motor is making a noise
but the blades aren't spinning.
Solution: Check whether the blade-holder disc is able to
spin freely. If it is, contact your nearest Authorised Dealer
because the motor is probably damaged and may require
servicing by a specialist repair shop.
Fig. 3
USER INFORMATION (Fig.3)
In accordance with Art. 13 of Legislative Decree 25 July 2005,
no. 15 "Implementing Directives 2002/95/EC, 2002/96/EC
and 2003/108/EC, on the restriction of the use of hazardous
substances in electrical and electronic equipment and on
waste disposal"
If the equipment bears a symbol depicting a crossed-out refuse
bin, this means that it must be collected separately from other
waste at the end of its working life.
When the equipment is no longer serviceable, accordingly, it
should be taken by the user to a special sorted collection centre
for electrical and electrotechnical waste, or if purchasing a new
www.oleomac.hu
product of similar type, returned to the dealer on a one-for-one
basis (takeback scheme).
Proper sorted collection ensures that the discarded equipment
can be sent subsequently for eco-friendly recycling, treatment
and disposal; this helps to avoid any possible negative impact on
the environment and on health, besides enabling the reclamation
of materials used in manufacturing the equipment.
Unauthorised dumping of waste is irresponsible, and punishable
under regulations pursuant to Leg. Decree no. 22/1997 (Article
50 et seq. of Legislative Decree no. 22/1997).

WARRANTY CERTIFICATE

This machine has been designed and manufactured using the
most modern techniques. The manufacturer guarantees the
machine to be free from defects for a period of twenty-four (24)
months from the date of purchase provided it is used exclusively
for private/hobby purposes. If the machine is used for professional
purposes, the warranty period shall terminate after a period of six
(6) months. If the machine is used for hire, the warranty period
shall terminate after a period of three (3) months.
MODEL
SERIAL N.
BOUGHT BY MR/MS
Do not send! Only attach to requests for technical warranties.
Limited warranty
1) The warranty period starts on the date of purchase. The
manufacturer, acting through the sales and technical
assistance network, shall replace free of charge any parts
proven defective in material, machining or manufacturing.
The warranty does not affect the purchaser's rights as
established under legislation governing the consequences of
defects in the machine.
2) Technical personnel will undertake the necessary repairs in
the minimum time possible, compatible with organisational
needs.
3) To make any claim under the warranty, this certificate of
warranty, fully completed, bearing the dealer's stamp and
accompanied by the invoice or receipt showing the date of
purchase, must be displayed to the personnel authorised to
approve work.
4) The warranty shall be null and void if:
− the machine has evidently not been serviced correctly,
− the machine has been used for improper purposes or has
been modified in any way,
− non-original spare parts and accessories have been fitted,
− work has been done on the machine by unauthorised
personnel.
5) The warranty does not cover consumables or parts subject to
normal wear.
6) The warranty does not cover work to update or improve the
machine.
7) The warranty does not cover any preparation or servicing
work required during the warranty period.
8) Damage incurred during transport must be immediately
brought to the attention of the carrier: failure to do so shall
render the warranty null and void.
9) The warranty does not cover injury or damage caused directly
or indirectly to persons or things by defects in the machine or
by periods of extended disuse of the machine resulting from
the said defects
EC DECLARATION OF CONFORMITY in accordance
with Directive 89/392/EEC
The undersigned
EMAK spa Via Fermi, 4 – Bagnolo in Piano (RE) – ITALY
declares under its sole responsibility that the
bioshredders SH 240 E – BT 2400 E
serial number identifi cation 10-072101÷10-072250
conforms with the provisions of the following harmonised
standards: EN 13683:2003
conform to the requirements of Directives
2000/14/EC – 73/23/EC – 89/336/EC - 98/37/EC
Guaranteed sound power level: 98 dB (A)
Bagnolo in Piano (RE)
ITALY, 01/01/2008
DATE
DEALER
S.P.A.
Giacomo Ferretti – Chairman
7
GB