Desa Remington 104316-04 Manual Para El Usuario página 15

FIGURES/FIGURAS/
FIGURES
Continued/ContinUa/Suite
Flat File/Escofina plana/Lime plate
/
Depth Gauge/Medida de
profundidad/Limiteur de
profondeur
Depth Gauge Tool/
Calibrador de medida
de profundidad/Outil
pour limiteur de
profondeu r
Depth Gauge Slot/
Ranura de medida de
profundidad/Fente du
limiteur de profondeur
Figure 21 - Depth Gauge Tool On Chain
Figura 21 -Calibrador de medida de profundidad
en la cadena
Figure 21 - Position de I'outil pour limiteur de
profondeur sur la chaine
Front Corner/,_,ngulo
anterior/Coin avant |
..... " _ ..025"
635 mm
Figure 22 - Round Off Front Corner Of Depth
Gauge
Figura 22 - Redondeo del _ngulo anterior de la
medida de profundidad
Figure 22 - Arrondir le coin avant du limiteur
de profondeur
REMINGTON
ELECTRIC CHAIN SAW
IMPORTANT: Read and understand this
manual before assembling or operating
this chain saw. Improper use of saw can
cause severe injury. Keep this manual
for future reference.
UNPACKING
1. Remove all items fiom carton.
2. Check all itemsfor any shippingda_qage.Ifyou find
any damage or if any parts ale missing, promptly
inform dealer where you bought chain saw.
CHAIN SAW NAMES AND
TERMS
Bucking Process of cutting a felled tree or k_g into
lengths.
Felling Process of cutting down a tree.
Felling Cut Final cut when Selling a tree. Make this
cut on opposite side of tree from notching cut.
Front Handle Located at front of saw body.
Front Hand Guard Shieldbetweenfiont handle and
guide bar. Protects left hand while using saw.
Guide Bar Metal bar that extends from saw body.
The guide bar supports and guides chain.
Guide Bar Nose Tip or end of guide bar.
Kickback Quick backward and upward motion of
guide bar. Kickback may occur when tip of guide bar
touches an object while chain is moving. The guide
bar will kick up and back towards operator.
Limbing Process of cutting limb(s) from a felled tree.
Low-Kickback Chain Chain that reduces chance of
kickback as required by ANSI B 175.1.
Normal Cutting Position Stance used while making
bucking and Selling cuts.
Notching Cut Notch cut in tree that directs fall of
tree.
Oiler Control System for oiling guide bar and chain.
Power Head Chain saw without chain and guide bar.
Also known as saw body.
Pushback{Kickback, Pinch)Rapidpushbackof chain
saw. Pushback may occur if chain along top of guide
bar is pinched, caught, or contacts a foreign object.
Rear Handle Handle located at mar of saw body.
Reduced Kickback Guide Bar Guide bar that re-
duces chanceof kickback.
Con fin u ed
www.desatech.com 108539 15