Description Of The Machine And Use; Description; Operation; Identification - breviglieri Mekfarmer 120 Instrucciones De Empleo Y Mantenimiento

Damage deriving from negligence, carelessness, bad and im-
proper use of the machine or incorrect manoeuvres by the opera-
tor are also excluded from the warranty. Removal of the safety
devices with which the machine is equipped shall automatically
void the warranty and relieve the Manufacturer from all liability in
merit.
The warranty also becomes void if spurious spare parts are used.
Even when covered by the warranty, the machine must be re-
turned Carriage Free.
1.3 DESCRIPTION OF THE MACHINE AND
USE
The mod. «mekfarmer 120» rotary harrow bears «CE» marking
in compliance with the European Union standards described
in Directive 98/37/EC and successive modifications, as
indicated in the declaration of conformity with which each
machine is provided.

1.3.1 DESCRIPTION

The mod. «mekfarmer 120» rotary harrow consists of a central
framework (1 Fig. 1) with three-point coupling that hitches to a
harrow unit.
The machine only operates when hitched to a tractor with an ad-
equate power rating (see technical specifications for the specific
power). The power required to operate the machine is transmit-
ted by the tractor through the driveline (with CE marking) which
engages with the central transmission unit (5 Fig. 1) and operates
the various tine rotors (10 Fig. 1).
KEY Fig. 1
A Front part
B Rear part
C Left side
D Right side
1 Three-point hitch framework
2 Upper 3-point hitch
3 Connection point to lift the machine
4 Driveline support
5 Gearbox unit
6 Bar adjuster ram
7 Harrow blade
8 Roller unit (cage, spiked, packer)
9 Side strip
10 Blade rotors
11 Front reinforcing tube
12 Lower 3-point hitch
13 Power take-off
14 Driveline shield
15 Bar adjuster ram support
16 Identification plate
17 Spring finisher tine (optional)
18 Rigid finisher tine (optional)

1.3.2 OPERATION

TThe mod. «mekfarmer 120» rotary harrow is solely designed
for use in agriculture in order to prepare, work and break up
the soil.
One single person seated in the driver's seat of the tractor is
able to carry out all the various operations.
Any other use of the machine differing from the explanations
given in this manual relieves for Manufacturer from all and
every liability for deriving damage to persons, animals or
property.
mekfarmer 120

1.4 IDENTIFICATION

Each machine is provided with an identification plate (16 Fig. 1)
with the following data:
- Manufacturer's name and address;
- «CE» marking;
- A) Machine model;
- B) Machine version;
- C) Serial number;
- D) Weight (in Kg);
- E) Year of manufacture.
The data on the identification plate of the machine should be cop-
ied into the last page of this manual and must always be stated
when spare parts and/or assistance are required.
Standard machine supply includes:
- Operation and maintenance manual for the machine;
- «CE» declaration of conformity.

1.5 NOISE LEVEL

The sound level has been measured in compliance with current
standards, with the following results:
- Acoustic pressure LpAm (A) ........................... dB
- Acoustic power LwA (A) .................................. dB

1.6 TECHNICAL SPECIFICATIONS

(See page 4, Fig. 2)
SECTION 2
General safety notes

2.1 SAFETY NOTES

The user must inform his personnel about the risks deriving from
accidents, about the safety devices installed to safeguard the
operator and about the general accident-preventing regulations
established by the Directives and by the laws in force in the coun-
try where the machine is used.
It is therefore essential for operators to carefully read this manual,
particularly the safety notes, and to pay great attention to opera-
tions which could be particularly hazardous.
The Manufacturer declines all and every liability for failure to
comply with the safety and prevention regulations given in
this manual.
Pay attention to this symbol when it appears in the manual. It
indicates a possible danger situation.
There are three danger levels:
DANGER: This is the maximum level danger signal and warns
that unless the described operations are carried out correctly, they
will cause serious injuries, death or long term health hazards.
WARNING: The «WARNING» signal warns that unless the de-
scribed operations are carried out correctly, they could cause
serious injuries, death or long term health hazards.
CAUTION: This sign warns that unless the described operations
are carried out correctly, they could cause damage to the ma-
chine and/or persons.
- 20 -
82.1
98.6