Troubleshooting - Biochef Axis Manual De Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Troubleshooting

The motor
1. If the juicer starts to vibrate slightly during
sounds noisy,
what shall I
do?
2. If your machine is making a loud noise, take all the
3. If the motor is not making a noise, check that all
4. Check the kind of produce you are using, as
What shall I
Call your distributor and order a new part. It is very
important to use the correct plunger/tamper for the
do if I've lost
the original
machine as they are made to fit each juicer precisely.
tamper?
PLEASE NOTE
or tamper will void warranty as the length and width of
the BioChef tamper is specific to this machine.
My juice is too
1. Adjut the pulp adjustment nozzle to number 4 or 5.
pulpy?
2. Introduce ingredients at a slower pace. Overfeeding
3. Ensure that your ingredients are fresh. Older
operation, turn off the machine and empty the drum
set. Re-assemble and resume normal operation.
extra parts off the machine and run the motor alone.
If it is still making a loud noise then contact your
distributor.
parts and seals are clean, as residue may create a
noise.
some kinds of produce are noisier than others, for
instance, if your produce is particularly hard or has
been frozen or refrigerated.
Using any other type of plunger / pusher
the juicer can result in pulpier juicer.
vegetables have less water content and can
produce a pulpier juice.
EN
9

Publicidad

Tabla de contenido
loading

Tabla de contenido