Magellan MiVue 420 Manual De Usuario página 10

Inserting a memory card.
You must insert a memory card (not supplied in all models) before you can start
recording. Your dashcam supports memory cards with up to 128GB capacity.
1. Hold the card by the edges and gently insert it into the slot with the label facing
the rear side of the recorder.
2. To remove a card gently push the top edge of the card inwards to release it and
pull it out of the slot.
Note:
ƒ DO NOT apply pressure to the centre of the memory card.
ƒ You are advised to use a Class 10 memory card with at least 8GB capacity.
ƒ MiTAC does not guarantee the product's compatibility with memory cards
from all manufacturers.
ƒ Before recording, format the memory card to avoid malfunction caused by
files not created by the dashcam.
ƒ Turn your dashcam off before removing the memory card.
7