Magellan MiVue 420 Manual De Usuario página 22

- G-Sensor Sensitivity: Sets the sensitivity level (Low, Medium or High) of the
G sensor that allows automatic triggering of the parking recording when the
recorder is in Parking mode.
- LED Indicator: The options are On and Off.
ƒ Video Recording
Changes the settings of recording, including:
- Video Clip Length: Sets the length of each video clip for a continuous recording
(1 min, 3 min or 5 min).
- EV: Sets the proper exposure level (-1 ~ +1) to adjust the brightness of the
image. The default setting is 0.
- G-Sensor Sensitivity: Sets the sensitivity level (6 levels, from Low to High)
of the G sensor that allows automatic triggering of the event recording while
continuous recording is in progress.
- Stamps: Sets the information (Coordinates or G-Sensor) that will be displayed
on the recorded video.
ƒ System
Allows you to change the system settings of the device.
- Satellites: Displays the status of GPS/GLONASS signal reception.
- Date/Time: Sets the system date and time. For more information see the
"Setting the date and time" section.
- System Sound: Enables or disables system notification sounds.
- Volume: Adjusts the volume level.
- LCD Standby: Selects Always On to keep the LCD on; or sets the timer for the
LCD to turn off automatically (10 sec, 1 min or 3 min) after recording starts.
Selecting Standby will turn off the LCD (in specified time) but still display the
time and speed information.
- Language: Sets the language.
- Distance Unit: Sets the preferred distance unit.
- Storage Allocation: The system provides 3 default memory configurations
19