Magellan MiVue 420 Manual De Usuario página 16

to > System > Storage Allocation to allocate storage for Parking recording.
Changing the allocation will erase the memory card, so save any videos or photos
to your computer first.
ƒ When Parking mode detection is enabled, the system will enter Parking mode
when you:
- disconnect the device's power (e.g. the vehicle engine is stopped or the power
cable is disconnected) or when the car stops moving for about 5 minutes*; or
- press to manually start Parking mode while Continuous recording is in
progress.
* The feature is triggered by the G sensor of the device. You can change the configuration by selecting
> Parking Mode > Auto Entry.
ƒ To stop Parking mode and resume Continuous recording, press
ƒ If movements were detected and recorded during Parking mode, you will be
asked to playback the video when you stop Parking mode.
ƒ Parking recordings are saved to the Parking category for file playback.
Camera mode.
ƒ Your dashcam allows you to take photos.
- If a recording is in progress, press
- Press > Camera >
* This function is not available when the rear camera is connected.
ƒ Photos are saved to the Photo category for file playback.
to take a photo*.
.
13
.