Operating Your Dashcam - Magellan MiVue 420 Manual De Usuario

Operating Your Dashcam.

Turning the recorder on.
Complete installation according to the instructions in the Setting Up Your Dashcam
section. Once the vehicle engine is started the recorder automatically turns on.
Restarting the recorder.
You may need to perform a hardware reset if your dashcam appears to be "frozen"
or unresponsive. To restart the dashcam, press and hold the Power button until the
system is shut down; press the Power button again to turn the recorder on.
Note: If the system does not shut down by keeping the Power button pressed,
force it to shut down by inserting a a straightened paperclip into the Shutdown
button on the top of the device.
Shutdown button
9