Changing System Settings - Magellan MiVue 420 Manual De Usuario

Changing System Settings.

To customize the system settings, press
Note: Depending on your MiVue model, certain settings may not be available.
ƒ File Playback
Plays the recorded videos and photos.
ƒ Camera
Press to enter Camera mode.
ƒ Sound Recording
Sets if you want to include sounds in the recordings. The default setting is On.
ƒ Driving Safety
The recorder provides advanced driving safety functions to make your driving
safer.
- Calibration: After the Lane Departure Warning System (LDWS) function is
enabled, follow the steps to calibrate the system:
1. Drive the vehicle in the middle of the lane.
2. Ask a passenger to select the option and then follow the on-screen
instructions to complete calibration.
Calibrate the system constantly in order to be alerted properly.
- LDWS: The default setting is Off. You can enable this function by selecting
Beep or Voice. Once enabled, the system will alert you when it detects that the
car speed is over 35 mph and the car has strayed from its intended lane.
- Headlight Reminder: The default setting is Off. Once enabled, the system will
remind you to turn the lights on when you are driving after dark.
- Driver Fatigue Alert: The default setting is Off. Once enabled, the system will
.
17