4. Connect the cables.
Route the cables through the top ceiling and the A-pillar so that it does not
interfere with driving. Make sure that the cable installation does not interfere
with the vehicle's airbags or other safety features.
Dashcam
Note:
If you only use the dashcam (without connecting the rear camera) in your
vehicle, connect the car charger to the dashcam and then plug it to the
Vehicle Power Outlet (VPA).
The installation illustrations are for your reference only. The placement
of the devices and cables may vary depending on the vehicle model. If you
encounter any problems during installation, contact a skilled installer (such
as the service personnel of the vehicle) for assistance.
Y-cable
Car charger
6
Rear camera cable
Rear camera