a
DjuSting the Volume
During the call, turn the scroll wheel on the Parrot MK6100.
The volume setting is saved for subsequent calls.
C
hanging to DiSCreet moDe
• During a call, if you want to continue the conversation on your phone (private
conversation), press the green button on the Parrot MK6100.
The call is transferred to the phone.
• If you want to switch back to the kit, press the green button again.
m
iCrophone mute
During a call, if you do not want the person on the other
end of the line to hear you, quickly press the «Play» button
on the remote controls of the Parrot MK6100.
Press the button again to cancel the mute.
S
DtmF
enDing
S
• During a call, you can send DTMFs (Dual-Tone Multi-Frequency) for touch-tone
dialling. This feature can be used for managing your voicemail, for example.
• Press the scroll wheel - the kit says «0».
• Turn the wheel to scroll through the numbers.
• Press the scroll wheel to send the selected number to the phone.
• Repeat this sequence for sending other DTMFs.
C
learing the memory
• You can pair up to 10 devices.
• If you attempt to pair an 11th device, the kit displays «memory full».
• To pair a new phone, you must clear the memory by the sub-menu "Settings /
paired devices".
CAUTION: This will clear all the contacts and voiceprints associated
with the phone at the same time.
S
eleCting a phone
If several phones are paired with the Parrot MK6100,
you can easily select the phone to be used.
1. Hold down the red button.
> The kit displays the list of available phones.
2. Select the phone that you wish to use via the scroll wheel.
3. Confirm.
Note: the use of certain features (voice recognition, redial, discreet mode) depends
exclusively on your phone. Refer to the Support heading on our website at www.parrot.
com for further information.
1