Operating the Setup Menu
Picture Adjust
BRIGHT/CONTRAST/COLOR/HUE
Settings are stored for each source (RGB, VCR1, VCR2).
Options
Bright [BRIGHT]:
Contrast [CONTRAST]:
Saturation [COLOR]:
Hue [HUE]:
1. Display the video to adjust. (Refer to pages 10 and 11.)
2. Display a menu screen and select [PICTURE ADJUST] menu.
(Refer to page 14.)
3. Select an item to adjust.
4. Adjust the item.
Note:
• The settings of [BRIGHT] and [CONTRAST] are stored separately for light ambient (daytime) and
dark ambient (nighttime).
• A yellow mark (
[CONTRAST] on the screen, respectively, as the front-panel ambient light sensor determines
brightness or darkness.
• [HUE] cannot be adjusted for PAL video.
15
Adjustment items
Makes black appear darker or lighter.
Narrow or widen the gap between black and white (darken).
Makes colors appear lighter or darker.
Adjust red or green of picture.
) or blue mark (
) is displayed to the right of [BRIGHT] and
P I C T U R E A D J U S T
BRIGHT
BRIGHT
CONTRAST
CONTRAST
COLOR
HUE
HUE
DIMMER
DIMMER
P I C T U R E A D J U S T
BRIGHT
BRIGHT
CONTRAST
CONTRAST
COLOR
HUE
HUE
DIMMER
DIMMER
Either can be adjusted within the range
of –24 to +24.
S E L
S E L