Declaration Of Conformity; Technical Specifications - Solo 630 Manual De Empleo

STORAGE OF CHAIN SAW
Store saw in a dry room. Bar and chain should be protected with
a scabbard.
Treatment with special engine anti-corrosion oil is not required
if saw is normally used with CASTROL SUPER TT two-cycle oil in
the fuel mixture.
For extended storage periods, completely empty both fuel and
oil tanks.
Regarding Bio-degradable chain oil, please follow our advice in
the section "Filling of Oil Tank".

Technical Specifications

Engine capacity ccm
Fuel mixture / mixing ratio
Max. performance at rpm to ISO 7293 kW/1/min
Max. torque at rpm Nm/1/min
Max. permissible rpm, no load, with bar and chain 1/min.
Medium idling speed rpm 1/min.
Fuel Tank capacity – liter
Oil tank capacity – liter
Chain sprocket, no. of teeth
Saw chain pitch, inches
Drive link gauge, mm (inches)
Drive link count
Cutting length of guide bar, cm (inches)
Sound pressure level L PA av to 1) ISO 07182 dB(A)
Noise level L av to ISO 9207 dB(A) measured/guaranteed
WA
Oscillation acceleration a FL to ISO 7505m/s
Weight kg (empty without bar and chain)
1) Specifications provided include measurements under full load and max. speed at equal parts.
with "CASTROL SUPTER TT"
with other brand 2-cycle oil 30/50
2
front/rear handle

Declaration of conformity

SOLO Kleinmotoren GmbH, Stuttgarter Strasse 41,
D-71069 Sindelfingen, certifies that the following product in the
version as supplied
Description of product: chain saw with combustion engine
Model/type description: 630 / 640
complies with the following EU guide lines: 98/37/EC for machines
and 89/336/EEC (modified with 92/31/EEC) for electromagnetic
compatibility.
Guaranteed sound power level (DIN45635) 110 dB(A)
Measured sound power level
The following harmonised standards were applied: EN 608 portable
chain saws,12/94, safety
Testing location:
This Declaration of Conformity will become invalid if the product is
modified, changed or altered without prior approval.
Sindelfingen, 1st January 2002
SOLO Kleinmotoren GmbH
In the best interest of continued technological progress
we reserve the right to change design and
configuration of any product without prior or other
notice. Therefore, please note that text and illustrations
of this manual are not to be considered binding and do
not constitute a basis for legal or other claims.
25
(DIN45635) 109,5 dB(A)
ITS Testing & Certification GmbH,
Handwerkstrasse 15,
D-70565 Stuttgart
Wolfgang Emmerich
Managing Director
630
36,2
50:1 (2%) 50:1 (2%)
25:1 (4%) 25:1 (4%)
1,5/8500 1,97/8500
2,2/6000 2,5/6000
11500
2800
0,33
0,23
6
3/8"
1,3 (0.50") 1,3 (0.50")
52
35 (14) 40 (16)
98,87
109,5/110 109,5/110
5,8/6,6
3,95
640
40,2
11500
2800
0,33
0,23
6
3/8"
56
96,2
6,4/7,3
3,95