Installing Cup Holder(S); Aircraft Installation; Instruction Manual Storage; Removing/Installing Fabric Seat Pad - Harmony TRANSIT DELUXE Manual De Instrucciones

INSTALLING CUP HOLDER(S)

1. Locate the slots in the sides of
the plastic booster base
2. Insert cup holder(s) into the
slot(s) in the side(s) of the
booster seat.
3. Ensure the groves on the sides
of the cup holder line up with
the groves on the seat base.
4. Push down gently until you hear a 'click' to lock into
place.
5. Pull up to remove.
This booster seat is NOT CERTIFIED for aircraft use.
Aircraft seats are not equipped with 3-point lap/shoulder
belts which are required for use with this booster seat.

INSTRUCTION MANUAL STORAGE

Store your instruction manual in
the storage section provided in the
underside of the booster seat

REMOVING/INSTALLING FABRIC SEAT PAD

TO REMOVE SEAT PAD:
1. Gently pull seat pad off plastic seat base.
TO INSTALL SEAT PAD:
1. Align seat pad with the top of plastic seat base.
2. Press down firmly to attach seat pad to plastic seat
base.

AIRCRAFT INSTALLATION

❶
.
❶
❶
22