Preparing Booster Seat For Use; Assembling Booster (When Applicable) - Harmony TRANSIT DELUXE Manual De Instrucciones

! NEVER use lap belts whose anchor
points are forward of the seat
crease.

PREPARING BOOSTER SEAT FOR USE

Incorrect use of the vehicle's 3-point lap/shoulder
seat belt system is the most common mistake people
make. It is VERY important to read, understand
and follow ALL instructions and warnings. DO NOT
mistake comfort for safety. The vehicle's 3-point lap/
shoulder seat belt MUST be snugly adjusted at all
times.
! ENSURE the vehicle shoulder belt's position is correct
for your child's size. VERIFY OFTEN.
! WARNING: DO NOT use this booster seat if the
midpoint of your child's head is above the top of the
vehicle seat back/vehicle headrest.

ASSEMBLING BOOSTER (WHEN APPLICABLE)

TIP: There is a RIGHT and a LEFT armrest, make sure you
are inserting the proper armrest in the proper side
of the booster seat.
1. Insert armrests (x2) by pushing downwards until they
'click' into place.
2. Ensure armrests are secured in place by pulling
upwards on them.
! WARNING: Once armrests are installed, they CANNOT
be removed.
17
WARNING!
!