The Dcf Signal (Time Transmitter) - Auriol HG02832A Instrucciones De Utilización Y De Seguridad

If no outdoor temperature is displayed after 3 minutes,the main
station will stop searching. The animation of the reception symbol
will turn off and the outdoor temperature field will show --._ °C and
--._ %. Most likely, the signal cannot be received due to structural
factors, reinforced concrete walls, the brickwork being too solid,
or the distance between the units. After finding a better location for
the outdoor sensor, reception will need to be restarted.
Press and hold the CH button
for 3 seconds until the reception signal becomes animated again.
The product will automatically start receiving the outdoor sensor
signal, regardless if signal from the outdoor sensor was received
or not. The clock field
symbol , indicating the receiver for the DCF signal is starting to
receive the time.

The DCF signal (time transmitter)

The DCF signal (German time transmission station) consists of time
impulses emitted by one of the most accurate clocks in the world,
located near Frankfurt / Main, Germany.
In ideal conditions, your main station can pick up this signal over a
distance of up to approx. 1500 km around Frankfurt / Main.
If the signal is detected the clock field
European Time, date and day of the week. A static radio tower symbol
appears. For more details please refer to section Basic settings.
If the attempts to receive a signal fail the main station will stop
attempting to receive a signal after 7 minutes and the radio tower
symbol will disappear. For information on how to resolve this issue
please refer to chapter Troubleshooting.
You may reactivate reception by pressing and holding the
DOWN-/
symbol in the clock field
40 GB/IE
will show an animated radio tower
24
button for three seconds until an radio tower
9
24
at the back of the main station
15
will show the current Central
24
becomes animated.