♦
♦
Using the outdoor sensor for the first time
♦
♦
♦
Using the weather station for the first time
♦
♦
♦
After a power supply has been connected, the display lights up
and quickly checks all display elements .
AHFL 433 A1
_291952_AHFL433A1_WeatherStation_LB9.indb 11
Both the weather station and the outdoor sensor can be
hung up using the fixing lugs 9/t .
Alternatively, the base q of the weather station can be
folded out for placement on an even, level surface .
Open the battery compartment o on the back of the
device by sliding the battery compartment cover p in the
direction of the arrow .
Insert two type AAA batteries as indicated in the battery
compartment o .
Then, close the battery compartment o . The indicator LED r
lights up briefly, and the current temperature, humidity and
selected channel (e .g . CH 1) are shown on the display e .
The indicator LED r then lights up once per minute, indi-
cating wireless transmission .
Open the battery compartment 0 on the back of the
device by removing the battery compartment cover w .
Insert three type AAA batteries as indicated in the battery
compartment 0 .
Then, close the battery compartment 0 .
│
11
■
US - EN
08.05.18 13:2