Safety Information; Safety Warnings; Preliminary Recommendations; General Information - WEG CFW500 ENC Guia De Instalacion

1 SAFETY INFORMATION

1.1 SAFETY WARNINGS

NOTE!
Only use the (CFW500-ENC or CFW500-
„
ENC2) expansion plug-in module with
encoder input in CFW500 series WEG
inverters.
We recommend reading the inverter user´s
„
manual before installing or operating this
accessory.
This guide contains important information
„
for the correct understanding and proper
operation of this module.

1.2 PRELIMINARY RECOMMENDATIONS

ATTENTION!
Always disconnect the general power
„
supply before connecting or disconnecting
the accessories on the frequency inverter.
Wait at least 10 minutes to guarantee
„
complete de-energization of the inverter.

2 GENERAL INFORMATION

This guide provides instructions for the installation,
configuration and operation of the plug-in expansion
module for encoder reader input (CFW500-ENC or
CFW500-ENC2).
The Plug-in module for encoder has two differential
channels, "A" and "B" designed up to 400 kHz
incremental encoder reader frequency. Moreover, it has a
configurable +5 V or +12 V output supply for quadrature
encoder operation.

3 PACKAGE CONTENT

When receiving the product, check if the package
contains:
Accessory in antistatic packaging.
„
Installation, configuration and operation guide.
„
ENC Encoder Input Plug-in Module
CFW500 | 5