Activating/Deactivating The Handset; Activating/Deactivating The Keypad Lock - Siemens Gigaset C59H Manual Del Usuario

Reverting to idle status
You can revert to idle status from anywhere in the menu as follows:
¤
Press and hold the end call key a.
or:
¤
Do not press any key: after 2 minutes the display automatically reverts to idle
status.
Settings that have not been saved by selecting the display keys
§Change§
are lost.
An example of the display in idle status appears on page 15.

Activating/deactivating the handset

a
Please note
When the handset is switched on, an animation of the Gigaset logo is displayed
for several seconds.

Activating/deactivating the keypad lock

The keypad lock prevents any unauthorized or accidental use of the phone.
#
If the keypad lock is activate a warning is shown when you press a key.
The keypad lock deactivates automatically when you receive a call. It is reactivated
when the call is ended.
Please note
When the keypad lock is active, you cannot call emergency numbers.
Emergency numbers cannot be dialed if the keypad lock is activated!
With the phone in idle status, press and hold the end call key
(confirmation tone) to switch off the handset.
Press and hold the end call key again to switch the handset on.
Press and hold the pound key in idle status to activate or deactivate the
keypad lock. You will hear the confirmation tone.
Using the phone
§OK§ §Yes§ §Save§
, , or
21