Oster FPSTFP4263-DFL Guia Del Usuario página 3

LEARNING ABOUT YOUR
14 CUP FOOD PROCESSOR
a
b
d
l
m
h
i
a f
Small Food Pusher
g
b Large Food Pusher
c h
Food Chute Lid
d i
Bowl Cover
j
e
Slice/Shred Disc
www.oster.com
4
FPSTFP4263-DFL_11ESM1.indd 4-5 FPSTFP4263-DFL_11ESM1.indd 4-5
c
n
g
f
j
k
k
Disc Stem Control Panel
l
Chopping Blade Small Chopping Blade
m
Bowl Small Bowl
n
Center Post Slide button
Base Lock Switch
1 Pulse - The Pulse button must be pressed and held for unit
to operate. When released, unit will stop. Use PULSE for
short processing tasks, such as chopping nuts, raw meats,
or vegetables. This lets you check processed results and
control the consistency.
2 Shred - When this button is pressed, unit runs continuously
on low speed until "Off " button is pressed.
3 Chop - When this button is pressed, unit runs continuously on
high speed until "Off " button is pressed.
4 Off - Processor should always be left in the OFF position when not in use.
e
NOTE: When slicing or shredding use high speed. When using chopping blade use
lower speed to control size of chopped food.
Before Using Your Oster® Food Processor
• When unpacking the product and removing packing material, handle
the chopping blade and slice/shred discs carefully: they are very sharp.
• Wash all parts except the Base in hot, soapy water. Rinse them dry.
These parts can also be placed in the dishwasher. Be sure to read the
Care & Cleaning Section of this manual to learn the correct methods
for taking the unit apart and cleaning.
Control Panel
www.oster.com
5
11/9/11 10:08 AM 11/9/11 10:08 AM