Initial Calibration; Overview Of Controls And Display; Control Functions - OHAUS PR Serie Manual Instrucciones De Montaje

2.5 Initial Calibration

For best results, the instrument's calibration should be checked prior to first use. If adjustment is
needed, refer to the Calibration section of the instruction manual.
3. OPERATION

3.1 Overview of Controls and Display

CONTROLS

CONTROL FUNCTIONS

Button
Primary
 If the balance is Off,
Function
turns on the balance.
(Short
 If the balance is On,
Press)
sets zero.
Secondary
 Zeros the current
Function
(Press and value.
Hold)
Menu
 Accepts the current
Function
(Short (blinking) setting on
the display.
Press)
On / Zero
 Sends the current
displayed value to
the serial interface.
Off
 Changes weighing
units.
Yes
 Rejects the current
(blinking) setting on
the display.
 Increments a value
being entered.
Print
 Operation is
dependent on the
application mode.
Unit
 Changes
application mode.
No
 Reverts back to
previous menu
item.
 Decrements a
value being
entered.
Function
 Performs tare
operation.
Mode
 Enters the main
menu.
Calibration is the
first sub-menu.
 Views the preset
Tare value.
Back
 Immediately exits
the sub-menu.
 Aborts a
calibration in
progress.
EN-3
Tare
Menu-Cal
Exit