Sicam FALCO EVO 622 Manual Original página 48

en 48 | FALCO EVO 622/622 IT | Operation
WARNING – Risk of injury to lower part of
body on rotation of clamping plate
Risk of injury from projecting parts of the
clamping plate as it rotates.
¶
Keep a safe distance from the clamping
plate.
¶
Always check that the plastic covers are in
perfect condition.
¶
Never remove the plastic covers.
Fig. 35: Plastic cover
10. By actuating the clamping plate pedal, turn the
clamping plate clockwise until the tire bead is com-
pletely released from the rim seat.
Fig. 36: Releasing upper tire bead
i
In the case of tubed tires, actuate the mounting
column pedal to fold over the mounting column and
pull out the tube.
11. Repeat the same operations for the lower tire bead.
Fig. 37: Releasing lower tire bead
12. By actuating the mounting column pedal, move the
mounting column to the rear to remove the tire.
|
1 695 101 508 2014-03-21
5.2 Fitting tires
WARNING - Risk of accident as a result of
damage to tires or rims
Damage to tires or rims caused during fitting
can lead to hazardous or even potentially
fatal situations when driving.
¶
Tires are only to be fitted by appropriately
qualified and trained personnel.
¶
Heed the Wdk fitting and removal instruc-
tions on www.wdk.de (available in German
and English):
$
Summary of criteria
$
Tire warm-up
¶
Do not subject tires and rims to force.
¶
Employ a low speed of rotation when fit-
ting tires on critical wheels.
¶
Use a sufficient amount of lubricant.
¶
Interrupt the fitting process immediately in
the event of any anomalies, e.g. abnormal
noise.
Additional information on fitting Runflat and UHP tires
WARNING - Risk of accident as a result of
damage to Runflat and UHP tires
Cracks occurring when working on cold tires
can result in the tire bursting at high speed.
¶
Observe the minimum tire core tempera-
ture of 15 °C for RFT/UHP.
¶
Store the tires at a controlled temperature
prior to fitting.
Sicam srl società unipersonale