Cleaning Intervals; Recommended Lubricants; Cleaning And Maintenance - Sicam FALCO EVO 622 Manual Original

en 52 | FALCO EVO 622/622 IT | Maintenance
6. Maintenance
6.1

Recommended lubricants

Component Lubricant
Gear unit Mineral lubricant
Compressed air Mineral lubricant
system
Tab. 7: List of lubricants
!
The manufacturer does not accept any liability for da-
mage arising from the use of lubricants with properties
differing from those specified (Standard).
6.2

Cleaning and maintenance

DANGER - Risk of electric shock from live
parts
Risk of electric shock from contact with elec-
trical components.
¶
Always switch off the
FALCO EVO 622/622 IT at the master switch
before performing any cleaning or mainte-
nance work.
¶
Unplug the mains connector.
DANGER - Risk of crushing by parts on ap-
plication of pressure
Risk of crushing due to the abrupt movement
of components or parts.
¶
Always disconnect the
FALCO EVO 622/622 IT from the com-
pressed air supply before performing any
cleaning and maintenance work.
!
Regular cleaning and maintenance of the
FALCO EVO 622/622 IT are essential to ensure ma-
ximum performance and proper operation of the
FALCO EVO 622/622 IT.
i
Maintenance work must be performed by the opera-
tor on the basis of the manufacturer's specifications
as follows.
|
1 695 101 508 2014-03-21
6.2.1
The illustration shows the areas where cleaning is
required to ensure maximum performance of the
FALCO EVO 622/622 IT.
Standard
ISO 460
DIN 51502-CLP
ISO 34-98-CC
ISO VG 32
Fig. 41:
Area
A
B
C
D
Tab. 8:

Cleaning intervals

Areas to be cleaned
Cleaning method
Use cleaning agent and lubricating spray.
Clean with a cloth and check the condition
of the protective equipment.
Use cleaning agent and lubricating spray.
Check the condition of the rubber guard
(wear, contamination)
Cleaning intervals
Sicam srl società unipersonale
x
x
x
x