Functional Description - Sicam FALCO EVO 622 Manual Original

No. Designation
18 Clamping jaws
19 Bead lifter
20 Tire inflation pressure gage
21 Tire deflation button
22 Inflation hose/
Inflation gun with manome-
ter FR
23 Lubricant tank
24 Filter unit
25 Compressed air tank
3.6

Functional description

The principal functions of the FALCO EVO 622/622 IT
components listed above are described in the following:
R
Unseating unit: For unseating the tire from the rim.
The bead breaker arm is moved by a double-acting
pneumatic cylinder. It can be set to 4 positions,
thus enabling the bead breaker blade to be opened
further for unseating particularly broad tires.
R
Mounting column, consisting of a tilting mounting
column with the components required for fitting and
removing the tire: Extending horizontal mounting
arm and extending vertical mast (with locking knob),
mounting head for removing the tire from and fitting
it on the rim using the bead lifter.
R
Clamping plate for securing and turning (counter-
clockwise and clockwise) the rim. The clamping
plate is driven pneumatically by way of two cylinders
and has four rails with clamping jaws for fixing the
rims in position on the inside and outside.
Sicam srl società unipersonale
Product description | FALCO EVO 622/622 IT | 37
FALCO EVO 622 : Clamping of rim on inside or outside
FALCO EVO 622 IT: Clamping of rim on inside or outside and seating of tire on rim using a jet of com-
pressed air
Lifting of tire bead when removing and fitting tire
Monitoring of tire inflation;
pressure gage conforms to EEC directive 87/217
Start of tire deflation
Hose for inflating tires
Mount for lubricant tank
Compressed air pressure monitoring and regulation
FALCO EVO 622 IT:Inflates tubeless tires. Inflation is achieved through high pressure blowing that
positions the tire bead on the rim edge.
The air tank (compliant to UE 87/404) has a capacity of 18 litres of compressed air.
Function
1 695 101 508
en
|
2014-03-21