Wireless Remote Controller; Operation Mode - Friedrich MW24Y3J Manual Del Proprietário

BEFORE USE
10

Wireless Remote Controller

1
2
3
4
5
6
7
8
9

Operation Mode

Cooling Mode
Auto Mode or Auto Changeover
Dehumidification mode
Heating Mode
• Cooling Model( ), Heat Pump Model(
1
ENERGY SAVING Button
Used to set or clear Energy saving.
2
FAN Button
Used to select Fan mode.
3
ON/OFF Button
Used to turn on/off the unit.
4
SURGE Button
10
Speed cooling operates super high fan
11
speed.
12
5
LEFT/RIGHT AIRFLOW Button (OPTIONAL)
Used to set the desired left/right(horizon-
13
tal) airflow direction.
14 6
UP/DOWN AIRFLOW Button
Used to stop or start louver movement and
15
set the desired up/down airflow direction.
16
7
ON TIMER Button
Used to set the time of starting operation.
17
8
SLEEP TIMER Button
Used to set the time of sleeping opera-
tion.
9
SET / CLEAR Button
Used to set/clear the timer. Used to set
the current time(if it input for 3sec.)
10
AUTO CLEAN Button
Used to set or clear Auto clean.
11
ROOM TEMPERATURE SETTING Button
Used to select the room temperature.
12
OPERATION MODE SELECTION Button
Used to select the operation mode.
13
INDOOR FAN SPEED SELECTION Button
Used to select fan speed in three steps
)
low, medium, high.
14
ROOM TEMPERATURE CHECKING Button
Used to check the room temperature.
15
OFF TIMER Button
Used to set the time of stopping opera-
tion.
16
TIMER SETTING(Up/Down)/LIGHT Button
Used to set the timer.
Used to adjust the brightness.(if it is not
time adjust mode)
17
RESET Button
Used to reset the remote controller.