Heating Mode - Friedrich MW24Y3J Manual Del Proprietário

Heating Mode

1
Press the ON/OFF button.
The unit will respond with beep sound.
2
Press MODE button to select Heating Mode.
3
Set the desired temperature by pressing TEMP button.
Press ROOM TEMPERATURE CHECKING button to
check the room temperature.
When setting the desired temperature is lower than
room temperature, heating wind isn't blow out.
To raise the temperature
To lower the temperature
4
Set the fan speed again. You can select the fan speed
in three steps–low, medium, high. Each time the but-
ton is pressed, the fan speed mode is shifted.
OPERATING INSTRUCTIONS
h Setting Temp. Range
in Heating Mode :
16~30°C (60°F~86°F)
13