Dehumidification Mode - Friedrich MW24Y3J Manual Del Proprietário

OPERATING INSTRUCTIONS
14
Dehumidification Mode
During Dehumidification Mode
• If you select the dehumidification mode on the operation selection button, the indoor unit
starts to run the dehumidification function, automatically setting the room temp. and air
volume to the best condition for dehumidification based on the sensed room temp.
In this case, the setting temp. is not displayed in the Remote Controller and you are not
able to control the room temp. either.
• During the healthy dehumidification function, the air volume is automatically set according
to the algorithm responding to the current room temp. and makes the room condition
healthy and comfortable even in the high humidity season.
1
Press the ON/OFF button.
The unit will respond with beep sound.
2
Press MODE button to select Dehumidification Mode.
3
Set the fan speed. You can select the fan speed in
three steps - low, medium, high. Each time the button
is pressed, the fan speed mode is shifted.