Astralpool 66175 Manual De Instalación página 25

4.3.4 TEMPERATURE MEASUREMENT SETTINGS MENU (menu index 3D)
Use the UP and DOWN keys to scroll through the various menus and submenus and to modify the data
(increase/decrease).
Use the ENTER key to access the data insertion submenus and to confirm any modifications.
3D TEMPERATURE DOSING
3D1 RELAY
3D2 FMW
3D3 OUTmA
Note: items 3D2 and 3D3 are not available.
The various items contained within the Redox measurement sub-menus are described below:
•
Menu index "3C1" TEMPERATURE RELAY
3D1 RELAY PH
>ON/OFF
TIMED
PWM
The various items contained within the pH relay's sub-menus are described below, with their various modes,
ranges and settings:
Item
On/Off:
SetPoint:
Dose Type:
Hysteresis:
Hysteresis Time:
Start Delay:
End Delay:
Timed
SetPoint:
Dose Type:
Hysteresis:
Hysteresis Time:
Start Delay:
End Delay:
On Time:
Off Time:
Proportional (PWM)
SetPoint:
Dose Type:
Hysteresis:
Hysteresis Time:
Start Delay:
End Delay:
Period:
Proportional Band:
0000137242
ON/OFF
↓ ↓ ↓ ↓
Default Value
25 °C
High
Off
Off
Off
Off
25 °C
High
Off
Off
Off
Off
1
1
25 °C
High
Off
Off
Off
Off
20 seconds
6 °C
Rev. 6.0
3D TEMPERATURE DOSING
3D4 ALARMS
3D5 PT TYPE:
3D6 T.VAL.:
The Redox relay's settings can be varied as follows:
•
ON/OFF (SetPoint threshold dosing)
•
TIMED (Timed dosing)
•
PWM (Proportional dosing)
0-100 °C
High / Low
1-20°C
1-900 Seconds
3-900 Seconds
3-900 Seconds
0-100 °C
High / Low
1-20°C
1-900 Seconds
3-900 Seconds
3-900 Seconds
1-1800 Sec
1-1800 Sec
0-100 °C
High / Low
1-20°C
1-900 Seconds
3-900 Seconds
3-900 Seconds
20-1800
3-30°C
↑ ↑ ↑ ↑
PT 100
25°C
Range
23